-
2.0KVA Generator
Power and EngineRead more- Max Output: 2200 VA / 2200 W
- Rated AC Output: 1800 VA / 1800 W
- Voltage / Frequency: 240V, 50 Hz single phase
- DC Output: 12V / 8.3A for battery charging
- Engine Type: Honda GXR120 4-stroke, OHC, air-cooled (121 cc displacement)
- Starting System: Recoil
- Fuel Tank Capacity: 3.6 litres
- Fuel Type: Regular unleaded
- Run Time: Up to 3.5 to 8 hours depending on load (with Eco-Throttle on)
- Dry Weight: 21.1 kg
- Dimensions (L x W x H): 509 mm x 290 mm x 425 mm
- Noise Level: 89 dB(A) sound power level (approx. 52–59 dB(A) at 7 meters depending on load
-
20KVA Generator
Staunch STYG20R Engine: Yanmar 4TNV88-GGEA Alternator: Stamford SOL2-G1 Prime Rating : 20kva 3 Phase + Single Phase DeepSea 4520 Controller 2 Wire Autostart Bus Bars Silent Canopy Single Lifting Point Bunded 100Lt Fuel Tank Lockable battery Isolator 6 Way Valve Electronic Fuel Gauge 65dB @ 7m 1 x 32Amp Outlet – MCB & RCD 3 x 15AMP Outlet – RCBO’sRead more -
3KVA Generator
Read moreFeature Specification Industry Rating 3.3 kVA Continuous Output 2,600 Watts (2.6 kW) Engine Model Genuine Honda GX200 (Overhead Valve) Alternator Mecc Alte Voltage / Frequency 240V / 50Hz (Single Phase) Outlets 2 x 10A (Weatherproof on Workcover Spec) Starting System Recoil Pull Start Fuel Tank Capacity 3.6 Litres (Standard tank) Fuel Consumption Approximately 1.3 Litres per hour (at maximum power) -
-
6KVA Generator
SpecificationsRead more- Continuous Output: 4400 Continuous Watts
- Maximum Rating: 5.5 kVA
- Engine Brand: Honda
- Amperage: 18.5 Amps
- Starting System: Recoil start (Electric start optional on deluxe configurations)
- Fuel Tank Capacity: 4.5 Litres
- Approximate Runtime: 3.2 Hours per tank under normal load
- Length: 820 mm
- Width: 540 mm
- Height: 600 mm
- Chassis: Heavy-duty perimeter protection rails with integrated angle anti-vibration mounts.
- Electrical Safety: Outfitted with a dedicated circuit breaker for over-current protection.
-
8KVA Generator
Power Output & ElectricalRead more- Industry Rating: 8.0 kVA
- Continuous Real Power: 6,800 Watts
- Voltage & Frequency: 240V AC, 50Hz
- Phase: Single Phase
- Alternator: Heavy-duty, brushless (typically Mecc Alte)
- Engine Model: Honda GX390 (13 HP)
- Starting System: manual recoil
- Fuel Type: Unleaded Petrol
- Fuel Tank Capacity: 6.5 Litres
- Fuel Consumption: ~2.5 Litres per hour at full load
- Continuous Runtime: ~2.6 to 2.8 hours per tank
- Safety Protection: Built-in RCD (Residual Current Device) earth leakage circuit breaker
- Outlets: 2 x 15 Amp IP66-rated weatherproof sockets
- Frame: Powder-coated, heavy-duty 32mm steel roll frame
- Dry Weight: Approx. 40 kg – 50kg
- Dimensions (LxWxH): 760 mm x 500 mm x 540 mm
-
All Terrain Scissor
Snorkel S2255RT & S2755T Available, both on trailers so you don't have to pay for freight!Read more -
Brick Saw
Read moreProduct Description
TS 350 E is an efficient universal masonry saw with high cutting capacity for all kinds of bricks and building blocks. With this table saw you get a maximum cutting depth of 100 mm in one pass or up to 200 mm by step cutting. You can easily plunge or bevel cut at 45 degrees for maximum versatility. The robust single-piece frame with integrated conveyor rails gives great rigidity and provides longer product life. The machine is easy to handle by one person thanks to the foldable legs. -
-
Cement Mixer
The Tradesman TP22M 2.2CF 65L 450W Concrete Mixer On Stand With Extended Wheels is a well engineered mixer ideal for the professional and semi professional user. With its durable high capacity 2.2CF steel bowl it also features reinforced structures for supports around axle, pneumatic tyres with steel rims, high torque 450W motor and single belt drive. Features:Read more- 16” pneumatic tyres & steel rims able to handle almost any terrain
- Heavy duty powder coated bowl 2.2 cubic feet / 65L capacity
- High torque 450W motor with single belt drive
- Large soft grip handle
- User friendly ON/OFF switch with reset button
- Extendable axles, axles extend from 670mm to 930mm
- Watts: 450W
- Voltage: 240V 50Hz
- Belt: Single
- Unmixed Dry: 85L or 3 CU/FT
- Mixed Wet: 65L or 2.2 CU/FT
- Gross Drum Volume: 110L or 4CU/FT
- Drum Mouth: 400mm (16")
- Bowl Material: Steel, Powder Coated, 35mm solid hardened steel shaft
- Tyre Size: 16” x 4.0 x 8
- Dimensions (L x W x H): 1350mm x 670mm x 1570mm
- Weight: 64kg
-
Compaction Plate (Wacker Packer)
Read moreWacker Neuson VPH70
With a range of reliable and powerful engines, low weight, compact dimensions and low-maintenance design, the VP 70 series Vibratory Plates are ideal for compaction of sand, crushed rock, granular materials and segmental brick paving. Features:- Compact design with centrally mounted, for an even spread of compactive force over the whole base plate
- Sturdy 4-stroke petrol or diesel engine with recoil starter is isolated from vibration by rubber dampers
- Vibration isolated reversible handle with throttle control for ease of operation and reduced operator fatigue
- Conveniently placed lifting handles, and a central lifting point for safe and easy handling
- Low maintenance design, backed by Wacker Neuson quality, reliability and product support
- Engine/motor type: Air-cooled single cylinder 4 cycle gasoline engine
- Engine/Motor brand: Honda
- Displacement: 163cm³
- Max Engine performance: 4.1kW
- Rotations per minute: 3600rpm
- Fuel consumption: 1.27l/hr
- Tank capacity: 3.6L
- Centrifugal force: 20kN
- Base plate size (L x W): 610mm x 460mm
- Lowest working height: 513mm
- Frequency: 116.6Hz
- Advance travel: 28m/min
- Surface capacity: 770m²/h
- Operating weight: 77kg
-
Compaction Plate/Rammer (Wacker Packer) Pad Foot
Wacker Neuson BS60-2Plus - Premium 2 Stroke Oil Injected Rammer Wacker Neuson Rammers are known as the benchmark of Rammers in the construction industry. Available in 4 sizes, with 4 engine options, there simply is no better choice for a Rammer than a Wacker Neuson. The BS60-2Plus is powered by a WM80 oil-injected 2-stroke engine, designed and manufactured by Wacker Neuson. The BS60-2Plus is fitted standard with a 280mm shoe. Operating Specifications:Read more
Engine:Operating weight 66 kg Ramming shoe (W x L) 280 x 330 mm L x W x H 673 x 343 x 965 mm Percussion rate 687 blows/min Stroke at the ramming shoe 80 mm Operating speed 9.8 m/min Surface capacity 164 m2/h Manufacturer Wacker Neuson Model WM 80 Construction Air-cooled single-cylinder two-cycle gasoline engine Displacement 80 cm3 Engine speed 4,400 rpm Engine output according to ISO 2 kW Fuel consumption 1 L/h Tank capacity 2.9 L -
Compressor
Peerless P17 P17 Single Phase Air Compressor: Belt Drive, 15Amp, 3.5HP, 320LPM Ultimate performance: 320L/min free air. Dual outlets: water trap filter regulator, direct tank pressure. Peerless cast iron pump, 5-year warranty. Impressive performance with reliability.Read more -
Concrete Grinder – Terrazzo
Machine SpecificationsRead more- Weight: 70 kg
- Dimensions: 1000 x 530 x 940 mm
- Motor Size: 1.5 kW (2 hp)
- Voltage: 240V single phase
- Disc Diameter: 350 mm (360 mm nominal size)
- Disc Speed: 360 rpm
- Segment Count: 3 abrasive segments
- Lead Length: 25 m
- Vacuum Port: 38 mm
- Build: Heavy-duty steel frame with a fabric dust shield.
- Control: Wheel height adjustment and built-in lifting bar.
- Maintenance: Low upkeep design with only two grease points
-
-
-
Double Toilet On Purpose Built Trailer
A Double Trailer is an excellent solution for when you need to move multiple portable toilets around with ease to various job sites, events, or waste disposal points. The trailer is manufactured from a galvanized duty frame to prevent rust, and portable toilets or showers sit low within the unit for extra stability when moving. The Statesman Portable Toilet is a favourite among a wide range of industries due to its versatility and durability. Fully self-contained, it can be used approximately 500 times before the waste needs to be removed.Read more -
-
Drive Unit
Engine SpecificationsRead more- Engine Model: Honda GX160 air-cooled, 4-stroke, single-cylinder petrol
- Displacement: 163 cm³
- Engine Output: 4.1 kW (5.5 hp) at 2,800 rpm
- Fuel Tank Capacity: 3.6 L
- Fuel Consumption: 0.92 L/h
- Operating Weight: 29 kg
- Dimensions (L x W x H): 460 x 460 x 530 mm
- Coupling Type: 3-dog universal coupling
- Base Design: Dished steel base plate for easy dragging over mesh
-
Drum Sander
Key Technical SpecsRead more- Drum Width: 200 mm (8 inches)
- Drum Speed: 3,300 rpm (single speed) or 2,500–3,300 rpm (multi-speed)
- Abrasive Size: 495 mm total length x 203 mm wide (19.5" x 8")
- Power Supply: 110/120 V or 220/240 V (50/60 Hz)
- Weight: Approx. 41.5 kg
- Dimensions: 940 mm (L) x 322 mm (W) x 855 mm (H)
- Noise Level: 95 dBa at 1 meter
- Vibration: 1.60 m/s² r.m.s.
-
Duct/Material Lift
Genie Superlift Advantage SLA-15 lift is ideal for wide loads as well as narrow doorways, and can be loaded easily into the bed of a pickup truck. OverviewRead more- Easy to set up quickly without tools in just seconds
- Removable attachments for easy storage and loading
- Multiple load-handling options
- Can be loaded easily into the bed of a pickup truck
-
-
Excavator – 1.7T
The Kubota U17-3 is the perfect excavator for tackling jobs in the tightest of spaces. Powered by Kubota 17HP engine, renowned worldwide for their outstanding reliability, the U17-3 delivers on superior maneuverability and maximum digging performance. This compact excavator delivers the power you need, the control you want and the smoothest performance when you need it most.Read more -
Excavator – 2.5T
Engine SpecificationsRead more- Model: Kubota D1105-E3 (3 cylinders)
- Gross Power: 20.9 hp (15.6 kW) @ 2,400 rpm
- Net Power: 19.8 hp (14.8 kW)
- Displacement: 1,123 cc
- Operating Weight: 2,545 kg (Canopy)
- Overall Length: 4,150 mm
- Overall Width: 1,500 mm
- Overall Height: 2,420 mm
- Ground Clearance: 285 mm
- Max Digging Depth: 2,810 mm
- Max Digging Radius: 4,770 mm
- Bucket Breakout Force: 2,320 kgf
- Arm Breakout Force: 1,245 kgf
- Auxiliary Hydraulic Flow: 48 L/min
-
-
-
-
-
-
-
-
Jackhammer Trolley/Tile Lifter
The fastest, safest way to remove tiles and thinsetRead moreDemolish with unmatched speed. Rip through ceramic tiles, cement, and more up to 6 times faster. The innovative design reduces impact and fatigue, with 80-degree angles across 5 settings. Streamlined and robust, the trolley boasts an easy-to-use spring and brake lever for angle adjustments and an inbuilt dampening system that minimizes impact, vibration, injury risk, and muscle fatigue. -
-
-
-
-
-
-
Lawn/Core Aerator
The Bluebird Lawn Aerator 19” is a self-propelled aerator and is used to core holes into compacted lawns. By removing the cores this allows the soil to loosen and water to feed directly to the root matter. Greater productivity, better manoeuvrability, and a user-friendly design are just a few of the outstanding features that make the 530 (19″ aerating width) lawn aerator a breeze to operate. BlueBird’s patented, free-wheeling tine system allows even inexperienced users to easily aerate corners and tight areas. Operators of the aerator will appreciate its simple design and low maintenance costs. A folding handle, lift handles and semi-pneumatic front tire provide easy transport, while removable side weights offer optimal soil penetration and balance for easier slope aeration. SpecificationsRead moreModel Number 530HP Brand Bluebird Digging Depth 3″ (75mm) Operational Width 19″ (482mm) Engine Model GX120 EngineBrand Honda Fuel Type Petrol Fuel Tank (L) 2.0L Weight (kg) 131kg Dimensions (LxWxH) 1220 x 736 x 1295mm Package (LxWxH) 1020 x 736 x 710mm -
-
Mini Loader – Kanga (Diesel)
Engine & Performance SpecsRead more- Engine Model: Kubota D902 3-cylinder water-cooled diesel
- Gross Power: 18.5 kW (25 hp) at 3,600 rpm
- Net Power: 17.5 kW (23.5 hp)
- Max Torque: 56.0 Nm
- Lift Capacity: 250 kg (551 lbs)
- Travel Speed: 7.5 km/h (4.7 mph)
- Fuel Capacity: 45 liters
- Operating Weight: 972 kg (2,138 lbs, water-filled tyres)
- Overall Width: 1,030 mm
- Ground Clearance: 185 mm
- Max Operating Height: 2,500 mm / 2,510 mm (with bucket)
- Tyres: Tracks
- Pump Output: 45 L/min
- System Pressure: 220 bar (3,200 psi)
- Hydraulic Reservoir: 70 liters
-
Mini Loader – Kanga (Petrol)
Engine & Performance SpecsRead more- Engine Model: Honda GX690 Petrol (air-cooled)
- Power Output: 16.5 kW (22.1 hp net / 28 gross hp)
- Lift Capacity: 250 kg
- Travel Speed: 7.0 km/h
- System Pressure: 207 bar (3,000 psi)
- Pump Output: 41 L/min
- Operating Weight: 875 kg (machine only with water-filled tyres)
- Overall Width: 1,030 mm
- Ground Clearance: 185 mm
- Max Operating Height: 2,500 mm
- Fuel Capacity: 45L to 50L (dual long-range tanks)
- Tyres: 23" lug tyres (water-filled )
-
Mini Loader – Vermeer
Read moreKey Features
- The S925TX comes standard with a dual hydraulic auxiliary system with high flow to power the most demanding attachments and a low flow to give the operator maximum control.
- Get more out of each day with a tipping capacity of 1198.8 kg and rated operating capacity of 419.6 kg while reaching to maximum hinge pin height at 214.6 cm.
- Single joystick ground drive control offers a smooth range of motion without balancing the engagement of two separate controls. The handgrip enables the operator to maintain a secure grip while providing good joystick control.
- Protective steel wings with cushioning increase operator comfort and support, providing a surface to brace against while working in uneven terrain.
- The dedicated spring-cushioned operator platform keeps the operator out of the mud and debris.
General Dimensions and Weights
- Design: Ride-on/track-drive
- Length (With Standard Bucket): 106 inches / 269.2 cm
- Length (Without Standard Bucket): 84 inches / 213.4 cm
- Width (With Standard Bucket): 42 inches / 106.7 cm
- Width (Without Standard Bucket): 36 inches / 91.4 cm
- Height: 58 inches / 147.3 cm
- Height (to Hinge Pin): 84.5 inches / 214.6 cm
- Ground Clearance: 6 inches / 15.2 cm
- Weight (Standard Bucket, Diesel Engine): 3465 lbs / 1571.7 kg
- Weight (No Bucket, Diesel Engine): 3350 lbs / 1519.5 kg
-
-
-
One Man Post Hole Digger
Read morePOWERED BY A GENUINE HONDA GX50SSE4 4-STROKE ENGINE – We chose the Honda GX50SSE4 (Side Exhaust) because of it’s specially designed exhaust port which prevents exhaust gas inhalation. Our machines are designed with safety in mind by positioning the exhaust port at the furthest point from the operator and ejecting exhaust gases parallel to the ground and directly opposite the operator. -
-
Plaster Panel Lifter
Key SpecificationsRead more- Maximum Height: 3350mm (11 ft)
- Minimum Height: 1485mm
- Maximum Load Capacity: 68kg
- Maximum Safe Panel Size: 1220 x 3080mm
- Gross Unit Weight: 45kg
- Tilting Crossbars: Allows safe and easy vertical loading before elevating horizontally.
- Dual Safety Mechanism: Features a winch brake and lock system alongside backstops to stop the panel from sliding backward.
- Mobility: Built with lockable castors for secure on-site positioning.
- Support Design: Includes extendable support arms and a crossbar locking pin for extra stability.
-
Portable Shower
The Portable Shower is an ideal solution for when you have access to water mains, but no permanent showering facilities. Simple to connect to running water and a hot water system, drainage is at the back of the Portable Shower for easy connection to nearby waste pipes.Read more -
Post Driver
POWERTECH HONDA GX50 POST DRIVER 100 The Powertech Honda GX50 Post Driver 100 is the perfect all-rounder, commercial grade and the ideal unit for fencing contractors, farmers or tradespersons needing to drive thousands of posts or star pickets. Powered by the Honda GX50 4-stroke engine and capable of driving small garden stakes right up to 100mm pine fence posts, this is the post driver to have!!! The Honda GX50 4-Stroke engine gives the PPD-100 its supreme punching power and reliability over it's competitors. This is the midsize commercial unit of the Powertech Fence Post Driver range and weighs in at 19kgs. Engineered with an oil and grease lubricated gearbox and piston housing this unit is build to last and requires minimal maintenance. The kit includes 5 different post sleeves and inserts to help cover the large variety of fence posts on the market today. We also have a selection of other adaptors to suit the most common applications so please give us a call if you are unsure whether what is provided in the kit will suit your needs. SpecificationsRead more- Capable of driving posts from 40mm-100mm.
- Powered by the Honda GX50 4-stroke engine.
- Max Power: 1.47kw@7000rpm 2.2Nm@5500rpm
- Impact energy: 25-50J
- Hydraulic oil gearbox.
- Unit weight: 19kg
- 360-degree inclinable operation.
- Post sleeves included 45mm, 55mm, 60mm, 78mmm & 100mm
- Perfect for driving planting stakes, star pickets and a range of fencing posts from steel to wooden.
- Internal spring-mounted handles for vibration absorption.
- Durable carry case and tool kit included.
-
Power Distribution Board and Lead
Power Distribution Board and Leads Multiple options available. Please call to discuss your requirements.Read more -
Pressure Washer – Stihl RB600
Engine & Power SpecsRead more- Displacement: 208 cc
- Engine Power: 5.2 kW (7.0 hp)
- Fuel Capacity: 4 Litres
- Starting System: Recoil starter with easy-start pump system
- Rated Pressure: 3,200 PSI (220 bar)
- Water Flow Rate: 11.3 L/min (680 L/h or 3.0 GPM)
- Pump Type: Commercial-grade brass triplex pump
- High-Pressure Hose: 12 meters / 40 ft (steel-braided)
- Nozzle Angles: 15°, 25°, 40°, and 65°
- Weight (without fuel): 53.5 kg (118 lbs)
- Sound Pressure Level: 90.2 dB(A)
- Sound Power Level: 103 dB(A
-
Roller 1.2T – Ride on
Read moreEngine & Performance- Engine: Honda GX630 2-cylinder gasoline
- Power Output: 15.5 kW (20.8 hp) @ 3,600 rpm
- Operating Weight: ~1,344 kg (varies slightly by config/ballast)
- Centrifugal Force (Front Drum): 15.1 kN
- Vibration Frequency: 70 Hz
- Travel Speed: 0–8 km/h (forward and reverse)
- Gradeability: Max. 30%
Dimensions & Capacities- Drum Width / Operating Width: 900 mm (35.4 in)
- Drum Diameter: 560 mm
- Fuel Tank Capacity: 23 L
- Water Tank Capacity: 23.8 L
Key Application Uses- Asphalt surface compaction (parking lots, driveways, patch work)
- Granular subbase layers
- Turf and landscape rolling
-
Roller 2.6T – Ride on
Read moreOperating Dimensions- Operating Weight: 2530 kg – 2800 kg
- Drum Width: 1200 mm (47.2 in)
- Machine Length: 2500 mm (98.4 in)
- Total Machine Width: 1350 mm (53.1 in)
- Drum Diameter: 740 mm
Engine & Performance- Engine: Kubota D1803-CR (Stage V / Tier 4 Final)
- Power Output: 25 kW (33.5 HP) @ 2100 rpm
- Travel Speed: 10 km/h – 11 km/h
- Max Centrifugal Force: Up to 41 kN – 46.5 kN
- Water Tank Capacity: ~40L
-
Rotary Hoe
RH918 HYDRAULIC ROTARY HOE The Red Roo RH918 Rotary Hoe powers through cultivating garden beds or preparing for new turf. The new and improved height adjustable handlebar pivots to either side so you do not have to walk on loose soil. The machine is ideal for land care professionals, councils, nurseries and the hire and rental industry. All hydraulic drive means easy maintenance, no downtime and the most efficient use of your horsepower to get the job done. Efficient weight distribution means your rotary hoe works for you instead of tossing you around in difficult conditions. The counter-rotating tyne feature breaks up the most difficult soil, clay or sod. Wheels and tynes work independently of each other to allow your rotary hoe travel speed to be adjusted to the soil conditions. New two speed feature and free wheeling hubs continue to make this model the number one selling rotary hoe in Australia and New Zealand. SpecificationsRead more- ENGINE
- ENGINE TYPE
- 9HP (7KW) OHV GX270 HONDA
- GENERAL
- LENGTH
- 1675MM (66")
- WIDTH
- 585MM (23")
- HEIGHT (TO TOP OF ENGINE)
- 710MM (28")
- WEIGHT
- 208 KG (460 LBS)
- WHEEL WIDTH
- 535MM (21")
- TINE WIDTH
- 460MM (18")
- TINE DIAMETER
- 330MM (13")
- TYRES
- 8 X 8 DIRECTIONAL
- FRAME
- 5MM ( 3/16") STEEL PLATE WITH DOUBLE WELDED SEAMS
- DIMENSIONS
- LENGTH
- 1400MM (55")
- WIDTH
- 660MM (30")
- HEIGHT
- 1050MM (41")
- WEIGHT
- 208KGS (460LBS)
-
-
-
Skid Steer Loader/ Bobcat 2.4T
701s Operating data Operating weight kg 2.400 Payload kg 680 Tipping load kg 1.360 Bucket capacity level m³ 0,29 Bucket capacity heaped m³ 0,36 Bucket width mm 1.520 Height mm 1.947 Length with bucket mm 3.060 Engine / Motor Engine / Motor Yanmar Engine / Motor type 4TNV88 Motor Water-cooled 4-cylinder diesel engine Engine performance kW 34 Displacement cm³ 2.189 RPM / speed Operation rpm 2.800 Battery Ah 88 Tank capacity l 52 Hydraulic system Operating pressure Work hydraulics bar 210 Operating hydraulics - discharge capacity l/min 62 Hydraulic oil tank l 55 Power transmission Travel speed km/h 12 Standard tires 10 x 16,5 Traction drive Quattrostatic = 4 separate drive motor/transmission units Service brake Hydr. parking brakeRead more -
Submersible Pump
Performance & Engine DataRead more- Discharge Capacity: 200 L/min (53 US gpm / up to 3,780 gal/hour)
- Max Head (Lift): 12 m (39 ft)
- Nominal Power: 0.4 kW (0.5 hp)
- Nominal Speed: 3,321 rpm
- Current (Full Load): 5.4 A (230V or 110V variants depending on regional model)
- Solids Handling Size: Up to 7–9.5 mm (0.3 in)
- Discharge Outlet Diameter: 50 mm (2 in)
- Dimensions (L x W x H): ~250 mm x 185 mm x 328 mm (9.8 x 7.3 x 12.9 in)
- Operating Weight: 11.3 kg (24.9 lbs)
- Power Cord Length: 6.1 m (20 ft)
-
-
Tile Saw
Read moreDescription: The Centaur Electric Tile Cutter is designed to cut tiles up to 750mm easily and cleanly. Designed to be easy to transport, this cutter is perfect for cutting large quantities of tiles for both DIY and Trade.Ideally suited for tiles: Porcelain, critically hard and granite up to 12mm. Soft Stone up to 15mm. Specifications:- Motor size: 1500 watt direct drive
- Length of cut: 750mm
- Bore size: 25.4mm
- Mitre Cut: 0° - 45°
- Plunge Cut
- Part No.: CEN750S2
- Max Cut Depth (mm): 45
- Blade Size (mm): 250
- Power Rating (w): 1500
- Brand: Centaur
- Net Weight (kg): 68kg
- Product Length (mm): 1200
- Product Width (mm): 600
- Product Height (mm): 1400
- Rip Guide
- Water pump
- Folding legs and wheels
- Pivot guides for adjustment
- Porcelain Blade
- 1 x Support table
-
Toilet On Purpose Built Trailer
The Statesman Portable Toilet is a favourite among a wide range of industries due to its versatility and durability. Fully self-contained, it can be used approximately 500 times before the waste needs to be removed.Read more -
Toilet On Skid
The Statesman Portable Toilet is a favourite among a wide range of industries due to its versatility and durability. Fully self-contained, it can be used approximately 500 times before the waste needs to be removed.Read more -
-
-
-
-
Trailer Car Beaver Tail
Tandem axle beaver tail car trailer, Trailer weight 800kg GVM 3000 kg Total load 2200 kgRead more -
Trailer Car Light
Tandem axle light car trailer, Tare 850kgs, ATM 1990kgs Max Load 1140kgsRead more -
-
-
Trailer Flat Top
Trailer flat top, Tare 1280 kgs, GVM 3000 kgs, Max Load 1720 kgs Great to carry building materials etcRead more -
-
-
-
Trailer Small Plant
Single axle trailer with full ramp, deck is 3050mm Long and 1830mm wide between the mud guards. This trailer is ideal for mowers and UTV/side by side vehicles.Read more -
Trailer Water Cart Fire Fighter
Tandem axle water cart trailer, 1500L capacity, Honda GX160 firefighter with hose. Honda specsRead moreENGINE TYPE: 4-stroke single cylinder,OHV petrol engine,25° inclined cylinder,horizontal shaftCYLINDER SLEEVE TYPE: Cast iron sleeveBORE X STROKE: 68 x 45 mmDISPLACEMENT: 163 cm³COMPRESSION RATIO: 9.0 : 1NET POWER: 3.6 kW ( 4.8 HP ) / 3600 rpmCONT. RATED POWER: 2.5 kW ( 3.4 HP ) / 3000 rpm, 2.9 kW ( 3.9 HP ) / 3600 rpmMAX. NET TORQUE: 10.3 Nm ( 1.05 kgfm ) / 2500 rpmIGNITION SYSTEM: TransistorisedSTARTER: RecoilFUEL TANK CAPACITY: 3.1 LiterFUEL CONS. AT CONT. RATED POWER: 1.4 L/h - 3600 rpmENGINE OIL CAPACITY: 0.6 LiterDIMENSIONS: (L X W X H)312 x 362 x 346 mmDRY WEIGHT: 15.1 kg -
Trash Pump
Pump PerformanceRead more- Max flow rate: 185 US gpm (700 l/min)
- Max discharge head: 98 to 106 ft (30 to 32 m)
- Max suction lift: 24.6 ft (7.5 m)
- Max solids size: 1 in (25 mm)
- Pressure: ~43.5 to 46 psi (3.2 bar)
- Engine model: Honda GX160 (Air-cooled, 4-stroke, single-cylinder)
- Max rated power: 4.8 hp (3.6 kW) @ 3,700 rpm
- Fuel tank capacity: 3.1 to 3.3 US gal (11.8 to 12.5 L)
- Run time: ~1.8 hours at full load
- Suction/Discharge diameter: 2 in (50 mm)
- Dimensions (L x W x H): ~21.7 x 18.3 x 19.6 in (550 x 466 x 501 mm)
- Operating weight: 95–131 lbs (43 kg)
-
-
-
-
Wallpaper & Vinyl Steamer
Read moreHTW-5 WALLPAPER & VINYL STEAMER
The HTW-5 Steam Team Wallpaper Stripper for the hire and rental, contractor and professional decorating markets is the safest and easiest to use steam wallpaper stripper available today. Robust and simple to service, the HTW features a unique anti-scald system and steam tank life-time guarantee.
The HTW is designed to efficiently plug and- strip - simply fill with hot or cold tap water and connect to the power supply. The HTW will steam-up in 10 to 25 minutes and continue to run for up to an hour and a half before switching off automatically when a low water level is reached.
The user then simply disconnects the HTW from the power supply, waits 2 minutes to allow the steamer to cool, and then refills. This eliminates the need for the user to remember to constantly check the water level.
Technical Specifications- Tank capacity: 7 litres
- Dry weight: 7.5 kg
- Power rating: 220/240V or 110V options; Heater element 1.4/1.6 kW to 2.2/2.5 kW
- Heat-up time: 10 to 25 minutes
- Run time: Up to 1.5 hours per fill (auto low-water shut-off)
- Mobility: 4 built-in castors
- Safety design: Two-stage anti-scald system prevents hot steam/water escape if the cap is touched during use.
- Tank construction: Marine alloy steam tank with a stainless steel heater element.
- Surface types: Strips vinyl, foil, flock, woodchip, multi-layered, painted-over papers, and hessian with UPVA glue.
-
Wood Splitter
Read moreSUPERAXE WS150
The WS150 features robust construction and a 150kg capacity cable operated block lifter. The innovative double handed control system ensures ease of use and unmatched safety. A 9hp engine is fitted as standard, but a 6hp engine is also available. The 9hp engine delivers a whopping 21 tons of splitting power and a 7 second cycle time. MAX TOW SPEED 60KM/H
Footer
About
Building equipment hire service in Mansfield, Victoria.